Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Avaya Virtual Services Platform 4000 regulatory information and safety precautions
- International regulatory statements of conformity
- National electromagnetic compliance (EMC) statements of compliance
- FCC statement (USA only)
- ICES statement (Canada only)
- CE marking statement (Europe only)
- European Union and European Free Trade Association (EFTA) notice
- VCCI statement (Japan/Nippon only)
- BSMI statement (Taiwan only)
- MIC notice (Republic of Korea only)
- National Safety Statements of Compliance
- EN 60950 statement
- NOM statement (Mexico only)
- Información NOM (unicamente para México)
- Denan statement (Japan/Nippon only)
- National Environmental Statements of Compliance
- Restriction on Hazardous Substances Directive Compliance Statement
- WEEE Directive Compliance Statement
- Notices
- Chapter 2: Introduction
- Chapter 3: New in this release
- Chapter 4: Hardware compatibility
- Chapter 5: Installing the Avaya Virtual Services Platform 4000
- Installation fundamentals
- Electrostatic discharge
- Environmental requirements
- Package contents
- Installing the Avaya Virtual Services Platform 4000 on a table or shelf
- Installing the Avaya Virtual Services Platform 4000 in an equipment rack
- Cable requirements for the Avaya Virtual Services Platform 4000
- Installation and removal of Small Form-factor Pluggable (SFP) transceivers
- RJ-45 connector pin assignments
- Console port pin assignments
- Power specifications for the Avaya Virtual Services Platform 4000
- Avaya Virtual Services Platform power supply power specification
- Installing the Avaya Virtual Services Platform 4000 power supply
- Connect AC power
- Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000
- Chapter 6: Translations of safety messages
Figure 5: 300W power supply
The 300W and 1000W AC power supplies use an IEC 60320 C16 AC power cord connector.
The AC power cord is in close proximity to the hot air exhaust, and supports high operating
temperatures.
Figure 6: IEC 60320 C16 connector
Power over Ethernet Plus specifications
Model
Maximum PoE+ W Average PoE+ W on 50 port
models
Avaya VSP 4850GTS—
PWR+ models
855W with one power supply
1855W with two power
supplies
15.4W (802.3af)
17.8W (802.3.at) — 1 power
supply
32.4W (802.3at) — 2 power
supplies
• VSP 4850GTS-PWR+ can support 802.3af 15.4W on each port with one power supply
installed. You can add a second power supply for redundancy.
• VSP 4850GTS-PWR+ can support 802.3at 32.4W on each port with two power supplies
installed. PoE+ power reduces to an average of 17.8W on each port with one power
supply.
Avaya Virtual Services Platform power supply power specification
Installation February 2014 39