Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Avaya Virtual Services Platform 4000 regulatory information and safety precautions
- International regulatory statements of conformity
- National electromagnetic compliance (EMC) statements of compliance
- FCC statement (USA only)
- ICES statement (Canada only)
- CE marking statement (Europe only)
- European Union and European Free Trade Association (EFTA) notice
- VCCI statement (Japan/Nippon only)
- BSMI statement (Taiwan only)
- MIC notice (Republic of Korea only)
- National Safety Statements of Compliance
- EN 60950 statement
- NOM statement (Mexico only)
- Información NOM (unicamente para México)
- Denan statement (Japan/Nippon only)
- National Environmental Statements of Compliance
- Restriction on Hazardous Substances Directive Compliance Statement
- WEEE Directive Compliance Statement
- Notices
- Chapter 2: Introduction
- Chapter 3: New in this release
- Chapter 4: Hardware compatibility
- Chapter 5: Installing the Avaya Virtual Services Platform 4000
- Installation fundamentals
- Electrostatic discharge
- Environmental requirements
- Package contents
- Installing the Avaya Virtual Services Platform 4000 on a table or shelf
- Installing the Avaya Virtual Services Platform 4000 in an equipment rack
- Cable requirements for the Avaya Virtual Services Platform 4000
- Installation and removal of Small Form-factor Pluggable (SFP) transceivers
- RJ-45 connector pin assignments
- Console port pin assignments
- Power specifications for the Avaya Virtual Services Platform 4000
- Avaya Virtual Services Platform power supply power specification
- Installing the Avaya Virtual Services Platform 4000 power supply
- Connect AC power
- Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000
- Chapter 6: Translations of safety messages
Hardware Description Part number
1000BASE-LX (LC) DDI 1310 nm, Gigabit Ethernet, duplex LC
connector
Range up to 10 km over single mode fiber
(SMF); up to 550 m over multimode fiber
(MMF)
AA1419049-E6
1000BASE-XD DDI 1310 nm, Gigabit Ethernet, duplex LC
connector
AA1419050-E6
1550 nm, Gigabit Ethernet, duplex LC
connector
AA1419051-E6
1000BASE-ZX DDI 1550 nm, Gigabit Ethernet, duplex LC
connector
AA1419052-E6
1000BASE-XD CWDM
(LC)
1470 nm to 1610 nm
Range up to 40 km
AA1419053-E6 to
AA1419060–E6
1000BASE-ZX CWDM
(LC)
1470 nm to 1610 nm
Range up to 70 km
AA1419061-E6 to
AA1419068-E6
1000BASE-BX10 DDI
SFP
1310 nm, single fiber LC
Range up to 10 km
AA1419069-E6
1000BASE-BX10 DDI
SFP
1490 nm, single fiber LC
Range up to 10 km
AA1419070-E6
1000BASE-EX DDI SFP 1550 nm
Range up to 120 km
AA1419071-E6
1000BASE-BX40
bidirectional SFP
1310 nm, single fiber LC
Range up to 40 km
AA1419076–E6
1000BASE-BX40
bidirectional SFP
1490 nm, single fiber LC
Range up to 40 km
AA1419077–E6
100BASE-FX SFP 1310 nm, LC connector AA1419074-E6
Small form factor (SFP+) pluggable plus transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow
10 gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide
precision keying and low interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 4: Compatible SFP+s
Hardware
Description Part number
10GBASE-LR/LW SFP+ 1310 nm SMF
Range up to 10 km
AA1403011-E6
10GBASE-ER/EW SFP+ 1550 nm SMF
Range up to 40 km
AA1403013-E6
Hardware compatibility
22 Installation February 2014
Comments? infodev@avaya.com