Installation Instructions

4. Remove the dust cover from the optical bore, and insert the fiber optic connector.
Example
The following figure shows an example installation of a bore plug transceiver with the bail latch
facing up. The figure does not represent a specific product.
Job aid
Depending on the transceiver manufacturer, the SFP transceiver can use different types of locking
and extractor mechanisms.
The following figure shows the typical mechanism used on SFP transceivers; other locking
mechanisms exist although they are not shown here. In the following figure, the SFP transceiver
uses the bore plug. Pull the bail to release the device.
Removing an SFP
Remove an SFP to replace it or to commission it elsewhere.
SFP
January 2018 Installing Transceivers and Optical Components on VOSS 28
Comments on this document? [e-mail]