Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: V2110 Virtual Appliance Overview
- 2: Deploy the Virtual Appliance
- 3: Configure the Virtual Appliance
- 4: Configure vSwitches for the Virtual Appliance
- Index
4 From the Ports list, double-click the vSwitch entry.
The vSwitch Properties dialog displays.
Figure 27: vSwitch properties MTU information screen
5 On the vSwitch Properties dialog, select the General tab.
6 In the Advanced Properties section, set the MTU to 1800.
7 Select Ok.
8 Select Close to close the vSwitch Properties dialog window.
Configure
vSwitches for the Virtual Appliance
ExtremeWireless™ V2110 Virtual Appliance Installation Guide 33