Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: V2110 Virtual Appliance Overview
- 2: Deploy the Virtual Appliance
- 3: Configure the Virtual Appliance
- 4: Configure vSwitches for the Virtual Appliance
- Index
For information on how to enable Jumbo Frames support on your controller, refer to the
ExtremeWireless User Guide.
To configure the vSwitch for Jumbo Frames support:
1 Log into the vSphere client host network.
2 On the vSphere Client Configuration screen, select the Properties link next to the virtual switch to be
configured.
The vSwitch Properties screen is displayed.
Figure 26: vSwitch properties screen
3 Select Ports tab on the vSwitch Properties window.
Configure
vSwitches for the Virtual Appliance
ExtremeWireless™ V2110 Virtual Appliance Installation Guide 32