Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: V2110 Virtual Appliance Overview
- 2: Deploy the Virtual Appliance
- 3: Configure the Virtual Appliance
- 4: Configure vSwitches for the Virtual Appliance
- Index
10 Select Ok to save the configuration.
11 Open the V2110 Virtual Machine Properties dialog on the main vSphere Client screen and select the
Hardware tab.
The USB device will be listed under Hardware.
You can now use the USB flash drive on V2110 just as you would on a physical controller.
Manage the Flash Memory
1 Right-click the name of the appliance, and select Power.
2 From the Power menu, select Power On.
3 From the Wireless Assistant menu, select Wireless Controller.
Configure
the Virtual Appliance
ExtremeWireless™ V2110 Virtual Appliance Installation Guide 22