Specifications

Overview
ExtremeXOS 12.4.1 Release Notes
9
NOTE
Upgrading the BootROM on a BlackDiamond 8810 or BlackDiamond 8806 switch is not automatic when you
upgrade the software. You must be running the minimum required BootROM version or later. Use the install firmware
command after upgrading the ExtremeXOS image to insure the BootROM is at the latest level.
BlackDiamond 10808 Switch Component Support
BlackDiamond 10808 components supported with ExtremeXOS 12.4.1, and the minimum ExtremeXOS
version required by the chassis to support each component, include:
G24Xc N/A 12.1.1.4 1.0.3.7
S-G8Xc N/A 12.1.1.4 1.0.3.7
10G4X N/A 11.1.1.9 1.0.1.7
10G4Xa N/A 11.6.1.9 1.0.1.11
10G4Ca N/A 12.0.1.11 1.0.1.11
10G4Xc N/A 12.1.1.4 1.0.3.7
10G8Xc N/A 12.1.1.4 1.0.3.7
S-10G1Xc N/A 12.1.1.4 1.0.3.7
PSU Controller N/A 11.1.1.9 2.13
700/1200 W AC PSU (Model #
60020/PS 2336)
N/A 11.1.1.9 N/A
600/900 W AC PSU (Model #
41050/PS 2431) (BlackDiamond
8806 only)
N/A 11.6.1.9 N/A
1200 W DC PSU (Model #
60021/PS 2350)
N/A 11.3.2.6 N/A
Table 2: BlackDiamond 10808 Component Support
BlackDiamond Component ExtremeXOS Filenames ExtremeXOS Required BootROM Version
MSM-1 bd10k-12.4.1.xos 10.1.0 1.0.1.5
MSM-1XL bd10k-12.4.1.xos 10.1.0 1.0.1.5
10G2X N/A 11.1.1 1.3.0.0
10G2H N/A 11.2.0 1.3.0.0
10G6X N/A 10.1.0 1.3.0.0
G20X N/A 11.1.1 1.3.0.0
G60X N/A 10.1.0 1.3.0.0
G60T N/A 10.1.0 1.3.0.0
PSU Controller N/A 10.1.0 N/A
700/1200 W AC PSU (Model
# 60020/PS 2336)
N/A 10.1.0 N/A
Table 1: BlackDiamond 8800 Series of Switches Component Support (Continued)
BlackDiamond 8810 and
BlackDiamond 8806 Components
ExtremeXOS Filenames ExtremeXOS Required BootROM Version