Specifications

Overview
ExtremeXOS 12.4.1 Release Notes
24
Upgrading to ExtremeXOS
See “Software Upgrade and Boot Options” in the ExtremeXOS 12.4 Concepts Guide for instructions on
upgrading ExtremeXOS software.
NOTE
For the BlackDiamond 8800 series of switches, a hitless upgrade to ExtremeXOS 12.4.1 from an earlier release is
not supported and should not be attempted. Use the normal software upgrade process for these switches.
NOTE
Hitless upgrade from ExtremeXOS 12.0 and earlier to ExtremeXOS 12.1 and later is not supported on the
BlackDiamond 12800 switch.
ExtremeXOS Command Line Support
The following is true for all Summit X150 and X350 series switches:
● Summit X150 and X350 series switches do not support L3 functionality; this platform does not
support CLI commands for L3 functionality.
● Summit X150 and X350 series switches do not support stacking; all CLI commands for stacking are
not supported on this platform.
● Summit X150 and X350 series switches do not support IP forwarding; however, CLI commands that
configure IP addresses function in order to access the management functionality of the switch are
supported.
● Upgrade or trial licensing is not available on the Summit X150 and X350 series switches.
Tested Third-Party Products
This section lists the third-party products tested for ExtremeXOS 12.4.1.
Tested RADIUS Servers
The following RADIUS servers are fully tested:
● Microsoft—Internet Authentication Server
● Funk Software—Steel-Belted RADIUS Enterprise Edition 4.5
● Meetinghouse
● FreeRADIUS
Tested Third-Party Clients
The following third-party clients are fully tested: