Specifications

Overview
ExtremeXOS 12.4.4 Release Notes
6
NOTE
ELRP should not be used to protect VPLS service VLANs because ELRP is not aware of VPLS pseudo
wires.
● Secure Shell (SSH) Serialized Licensing and Distribution—This process is not supported in
ExtremeXOS 12.4.4 software.
Feature Corrections in ExtremeXOS 12.4.3
This section lists the feature corrections supported in ExtremeXOS 12.4.3 software:
● CVLAN Support—CVLAN support on BlackDiamond 20800 series switches is updated in this release to
support duplicate CVLAN tags on a switch. However, CVLANs with duplicate tags must not be
assigned to the same port.
Feature Corrections in ExtremeXOS 12.4.2-patch1-3
This section lists the feature corrections supported in ExtremeXOS 12.4.2-patch1-3 software:
● BlackDiamond 20800 Series Switch—The BlackDiamond 20800 series switch now supports 4,092
vMANs on a port whose ethertype is 0x8100 (PD4-1238488732).
Feature Corrections in ExtremeXOS 12.4.2
This section lists the feature corrections supported in ExtremeXOS 12.4.2 software:
● Bootstrap Protocol (BOOTP) Relay
- BOOTP Relay can now be enabled and disabled on a single VLAN.
-Output from
show bootprelay configuration command now displays the configuration of
BOOTP Relay on one or all VLANs for the specified virtual router (VR).
● Simple Network Management Protocol (SNMP)—Provides support for enabling and disabling
SNMP for any VR. The
enable snmp access, disable snmp access, and show snmp commands
have been modified to support this option.
● Forwarding Database (FDB)—The show fdb stats command now displays a dynamic page that
automatically refreshes FDB entry statistics for specified ports and VLANs. The
no refresh
command option displays a static report.
● IP Address Resolution Protocol (ARP)—The show iparp stats command now displays a dynamic
page that automatically refreshes IP ARP entry statistics for specified ports and VLANs. The
no
refresh
command option displays a static report.
● XML Notification—New option allows user to specify a VR over which the XML client process can
connect to a Web server to send push notifications. The
create xml-notification target url,
configure xml-notification target, and show xml-notification commands have been
modified for this added support.