Specifications

Overview
ExtremeXOS 12.4.4 Release Notes
14
NOTE
Use the show version detail command to see the firmware version. Use the show fans command
to see the fan tray version and to ensure that all fans are operational before running the install firmware
command. Use the show slots command to see which slots are operational.
Summit X150 and X350 Component Support
Summit X150 and X350 series components supported with ExtremeXOS 12.4.4, and the minimum
BootROM version required by the switch to support each component, include:
XFM-1 (shown as Fabric-1 through
Fabric-5) (BlackDiamond 20808)
uC
N/A 12.3.2
2.7
XFM-2 (shown as Fabric-1 through
Fabric-5) (BlackDiamond 20804)
uC
N/A 12.4.1
2.6
MM Basic
uC
FPGA: S
BootROM
PSUCTRL
bd20k-12.4.4.10-patch1-9.xos 12.3.2
2.7
0.3.E
0.2.1
2.8
Fan Tray (BlackDiamond 20808)
(part number 806014)
uC (shown as “Revision”)
N/A 12.3.2
2.7
Fan Tray (BlackDiamond 20804)
(part number 806030)
uC (shown as “Revision”)
N/A 12.4.1
2.7
Table 6: Summit X150 and X350 Component Support
Summit X150 and X350
Components ExtremeXOS Filenames
Minimum
ExtremeXOS
Required
Minimum
BootROM
Version
Summit X150-24t summitX-12.4.4.10-patch1-9.xos 12.0.2.25 1.0.3.1
Summit X150-48t summitX-12.4.4.10-patch1-9.xos 12.0.2.25 1.0.3.1
Summit X150-24p summitX-12.4.4.10-patch1-9.xos 12.0.2.25 1.0.3.1
Summit X350-24t summitX-12.4.4.10-patch1-9.xos 12.0.3.16 1.0.3.1
Summit X350-48t summitX-12.4.4.10-patch1-9.xos 12.0.3.16 1.0.3.1
XGM2-2sf (Summit X350 only) summitX-12.4.4.10-patch1-9.xos 12.2.1 N/A
XGM2-2bt (Summit X350 only) summitX-12.4.4.10-patch1-9.xos 12.2.1 N/A
Table 5: BlackDiamond 20800 Series Switch Component Support (Continued)
BlackDiamond 20800
Components ExtremeXOS Filenames
ExtremeXOS
Required
Firmware Version
Required with
ExtremeXOS 12.4.4