User`s manual

Anritsu User’s Manual - Page 8 of 13.
EXAMPLE:
MODE: Spectrum Analyzer
Field
Label
Collection mode
Type
STRING STRING
Range
TYPE: {SPECTRUM ANALYZER, POWER
MONITOR}
Required
Field
Yes Yes
Example
TYPE: SITEMASTER
Optional: Base Station Association Information [Line 3]
If the mode chosen was Spectrum Analyzer, this line additionally indicates the
association mode, either by markers or by averaging. There is a tab placed between the
end of “Spectrum Analyzer” and the start of “ASSOCIATIONS”. This field does not
appear under Power Monitor mode.
EXAMPLE:
ASSOCIATIONS: MARKERS
Field Label Base Station Association
Method
Type
STRING STRING
Range
ASSOCIATIO
NS:
{AVERAGING, MARKERS}
Required
Field
Yes Yes
Example
ASSOCIATIO
NS:
MARKERS
Measurement Run Identifier [Line 4]
This line of the Header identifies a unique name for the measurement run. This
name is used to differentiate measurement runs that have been read into Summit
WMScanner or created by Summit WMScanner. Generally, the name given to the
measurement run is the same as the logfile itself. This line of the Header consists of the
label “MEASUREMENT RUN:” followed by a string field (alphanumeric characters
only), separated by a tab. For the WVC Logfile, this should appear similar to the
following: