User`s manual

Anritsu User’s Manual - Page 5 of 13.
connected to the Anritsu HHSA. If an RF detector is not attached, all
measurements will be recorded as –100 dBm.
2. Click the “Associate Base Stations” button to associate measurement data with
base stations placed within the current building. Refer to Figure 3 for help in
navigating the base station association dialog.
3. If spectrum analyzer mode was chosen in Step 2 above, now choose the desired
base station association method. Two options are available.
Figure 3: Base Station Associations Dialog
a) Using the first option, the entire sweep of data is averaged linearly and the
average value is associated with a base station.
b) Using the second option, individual markers can be used to associate
unique frequencies with different base stations. NOTE: In the current
version, only one marker may be associated with each base station. If
more than one marker is associated with a single base station other
post-processing will only choose one marker, potentially causing
unforeseen results.
4. If Power Monitor mode was chosen in Step 1 above, then select the base station to
associate measurement data with.
5. Click OK to save the selected base station associations.