User`s manual

Anritsu User’s Manual - Page 4 of 13.
Figure 2: Anritsu MS2711 HHSA Options Dialog Box
Referring to Figure 2, follow the steps given below to configure the desired
options for collecting data:
1. Select the measurement mode: either Spectrum Analyzer, Channel Number, or
Power Monitor.
• If spectrum analyzer mode was selected, select the desired sweep options.
For more information on how to choose these settings, consult the Anritsu
MS2711 HHSA User’s Guide published by the device manufacturer.
• Channel Number mode is another way of selecting settings for operating
the Anritsu in Spectrum Analyzer mode. Simply select the channel
standard and the channel number you wish to monitor.
• If power monitor mode was selected, make sure an RF detector is