User`s manual

Anritsu User’s Manual - Page 10 of 13.
EXAMPLE:
# ASSOCIATION MARKERS: 2
Field Label Number of Markers
Type
STRING INTEGER
Range
# ASSOCIATION
MARKERS:
0 to 32767
Required
Field
Yes YES
Example
# ASSOCIATION
MARKERS:
2
Base Station Associations Header [Line 7]
This line of the Header is used as a column label for the base station associations.
It always consists of the text “TRANSMITTER” and optionally the text “FREQUENCY
(MHz)”. The latter is used only when markers have been used to associate specific
frequencies with various base stations.
EXAMPLE:
TRANSMITTER FREQUENCY (MHz)
Base Station Associations Header
Type
STRING
Range
{TRANSMITTER, TRANSMITTER
FREQUENCY (MHz)}
Required
Field
Yes
Example
TRANSMITTER FREQUENCY (MHz)
Transmitter Associations [Lines 8-10 (for this example)]
In this example, there are 3 base station associations. Therefore, this section
consists of the eighth line through the tenth line. These lines of data consist of the base
station name and the frequency associated with that base station. The base station name
is a string and the frequency is a floating-point number with a single digit of precision
after the decimal. If no associations have been made, then the base station name is “NOT
ASSIGNED”. If power monitor mode has been used or if no markers have been used to
associate data, then the frequency column will not appear.