User guide

WMScanner GUI and Menus
Summit WMScanner Users Guide50
Project Information
You can view and edit information about the current project. Select Utilities > Project Information. When
the Project Information dialog appears, optionally enter Project, Customer, and Notes information and
select OK when finished.
Setting the Project Workspace
To set the project workspace, select File > Set/Create Project Workspace. The Project Workspace selection dialog
appears:
Show Distance
Between Points
This command prompts the user to select points in a drawing; Summit
WMScanner draws temporary line segments between consecutive points. While
the mouse cursor is moved around, a tool tip displays the sum of the lengths of
the line segments. Pressing ESC once will cancel the current set of lines, and
pressing ESC again will terminate the command. The distance is based on the
current scale of the drawing.
Preferences This command brings up an Options dialog box that allows you to configure
various Summit WMScanner settings with respect to File, Display, Save, Plotting,
User preferences, Drafting, and Selection.
WMS Configuration Use this option to save WMS configuration information to a WMS server. If a
target WMS server has not been specified, a dialog displays where the WMS
Server IP address and port can be defined as well as the user permissions
required to initiate the operation.