Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide82
wlan 2 enable
wlan 2 ssid wlan2
To create a template:
1 Select a device for which you would like to create a configuration template.
2 Select the Configuration tab from within the My Networks menu item.
3 Select Te m p la te s .
4 Click the Create button.
The Create Configuration Template from Device screen displays.
5 Provide the following to complete the creation of the template for a target device model:
6 Select the This partial configuration will be merged with existing settings checkbox to define this
configuration as only a specific feature modification and not a complete configuration replacement.
If you want to change only part of a device’s configuration, select the partial configuration option.
After the application of a partial template, a device is not restarted. With Extreme Networks
controllers, the configuration is applied to the running-configuration and then saved.
7 Select the This total configuration will completely replace existing settings checkbox to define this
configuration as a complete replacement.
If you want to change the device’s full configuration, you should select the total option. After a total
template is applied, the device is restarted.
NOTE
Altitude 3510, Altitude 3550 and Altitude 4600 Series devices handle configuration commands in a config file as
‘blocks’ of information and substitute the current config with the newly specified config at ‘block’ levels. For
example, if an Altitude 3510 is currently configured with one WLAN and you want to add another WLAN, the partial
Device Name
Provide a name for the device providing the configuration template.
IP Address
Defines the IP address of the device.
Template Name
Define a template name appropriate to the configuration’s settings, device or
model.
Description
Provide an adequate description for the template that explains its intended
function,. perhaps in relation to its feature set and derived device model.