Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide78
differences. Determine whether the noted differences require immediate resolution, if so, see
“Resolving a Non Compliant Device Configuration” on page 78.
4 Click Close to exit the screen and revert back to the Compliance tab.
Resolving a Non Compliant Device Configuration
WMS can accept or reject the changes detected on a device. If a device is in a non-compliant state, select
the Resolve button. The Resolve Device Compliance Differences screen displays the changes to the device
configuration. Once reviewed, either accept or reject the changes.
Accepting the changes updates the Saved Config within WMS and the device becomes compliant. When
you reject the changes, WMS copies the saved configuration to device’s start-up configuration and
reboots the device.
To resolve a non compliant configuration and save it as the device’s new configuration:
1 Select the Configuration tab from within the My Networks menu item.
2 Highlight a device (controller or other) from within the Compliance tab.
Ensure the selected device requires compliance resolution, as there is no reason to resolve a
configuration that’s currently compliant.
3 Select Resolve.
4 Review the Status and the text in the main window, as that describes (in detail) each configuration
change that resulted in the compliance differential.
A message displays prompting whether you would like to accept or reject the changed configuration
detected by WMS.
5 Click Accept to initiate a job to push the configuration to the device and save the modified
configuration as the new WMS saved (and compliant) configuration.
6 Click Reject to initiate a job that pushes the WMS saved configuration back to the device, and either
saves it as saved config or as the device’s current configuration.
7 Click Cancel to exit the screen and revert back to the Compliance tab without accepting or rejecting
changes to the devices’s configuration.
Resetting Device Compliance
Resetting device compliance removes the device’s saved configuration and moves the device to an
unknown state.
To reset compliance information for a selected device or a group of devices:
1 Select the Configuration tab from within the My Networks menu item.
2 Select a device (controller or other) from within the Compliance tab.
Optionally select a group of devices, as needed, to reset device compliance collectively.
3 Select Reset.
The Reset Devices Compliance Differences screen displays. You are prompted as to whether you would
really like to reset compliance information for the device or group of devices listed.