Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide76
4 Click Close to exit the screen and return to the Compliance tab.
Checking a Device’s Compliance Now
If an assessment of a device compliance is required immediately (as opposed to waiting for the next
SNMP polling interval), WMS allows a selected device’s compliance to be checked at the time of the
request.
To assess a selected device’s compliance now:
1 Select the Configuration tab from within the My Networks menu item.
2 Highlight a device (controller or other) from within the Compliance tab.
3 Click the Check button.
4 The Check Device Configuration Now screen displays with the device name and IP address of the
selected device. Additionally, the screen prompts the user whether they would like to begin the
assessment of compliance for the selected device now.
Device Name
Displays the name of the device subject to the compliance verification.
IP Address
Displays the IP address of the selected device.
Configuration
Field
The main field within the View Device Configuration screen displays the
configuration last recorded by WMS. This is the configuration used to assess
compliance or conflict versus the next WMS polled configuration.