Specifications

Extreme Networks Wireless Management Suite Reference Guide 57
View Controls
Refer to the View Controls to define how floors and devices scale within the Network View panel and
display in contrast with one another (their degree of separation).
To use the Network View set of view controls:
1 Expand the View Controls field from within the Network View panel.
2 Refer to the following to discern whether changes are needed to the Network View.
Sibling Spread
Select sibling spread to expand (include) device associations for all radios
deployed within supported sites. You may want to use this with an individual site,
as opposed to AllSites, to reduce the complexity of the view.
Interleave nodes
Enables or disables node interleaving. This option is disabled until the Sibling
Spread option is selected.
Honor node size
Selecting this option takes node size into account when calculating distances
between devices and floors within the Network View display.
Network Depth
Increases/decreases the depth between floors and devices populating a Network
View display. Use this feature as needed when devices, sites and floors require
separation to review device associations for deployment efficiency. Depth allows
users to move up and down through the network association tree for all network
views (site, device and mesh). When displaying AllSites, this option could be
useful, as the Network View display will be much busier then selecting just an
individual site.
Zoom
Increases/decreases the top-down view size of the floors and devices populating a
Network View display. Use the (-) and (+) functions to size the display. This
feature allows users to zoom in and out of network views (Site, Device and Mesh).
Scaling
Scales just the displayed floors and devices using the (-) and (+) functions. This
option does not increase or decrease the degree of separation.