Specifications
Extreme Networks Wireless Management Suite Reference Guide 49
If the device expanded and selected from a site houses a single radio, then only the supporting
information for that single radio displays. If the device is dual radio model, the attributes of both
radios displays. If the device is a three radio AP-7131N model access point, then up to three radios
could display.
Refer to the following to assess the attributes of the selected device’s radio(s):
DeviceList
A WMS deployment is supported by sites comprised of controller and access points whose network
address, status and compliance information can be listed collectively (for each site), for specific sites and
floors or individually. Select a device link within the DeviceList to launch its own Dashboard to assess
whether the controller or access point is properly load balanced within a particular site or floor or
whether its sufficiently carrying its device load in respect to other controllers or access points within the
same radio coverage area.
To display the DeviceList:
1 Select the My Network main menu item.
2 Select AllSites, a specific site or a specific controller or access point whose device associations you
would like listed.
3 Select Summary tab (if not already displayed).
4 Select the Dashboard tab.
Radio Name
Lists the radio’s assigned name. This name was determined by the radio’s
description in the controller or AP.
Radio MAC
Displays the radio’s factory assigned MAC address. This value cannot be modified
by WMS. Each radio has a separate MAC address, regardless of the radios residing
within the same device.
Radio Type
Lists the radio type the radio supports (either 802.11a, 802.11a/n, 802.11b/g/n
or
802.11b/g).
Channel
Displays the operating channel assigned to the radio.
Power (dBm)
Displays the listed radio’s current transmit power.
Throughput
Lists the radio’s throughout value (in Kbps). This is the last reported value to WMS
from the last performance polling period.
AP Name
Displays the name of the AP the radio is currently associated with.
AP IP Address
Displays the IP address of the AP the radio is currently associated with.