Specifications

Extreme Networks Wireless Management Suite Reference Guide 169
7 Define whether the template is a partial or total configuration using the radio boxes provided.
● If you select Partial, the template is stored as a partial configuration. Use this template to
incrementally update a device's configuration.
● If you select To tal, the template is stored as a full configuration. Use this template to replace a
Saved Config or a (non controller) device’s current configuration.
8 Provide the variable name within the Variable Name field.
Once provided, ensure the configuration contains the correct variables. For example, if your template
file has just the following line:
timezone _#TimeZone#_
NOTE
You cannot apply a variable file with an empty attribute. If there are no values for an attribute and you want to leave
the attribute empty, see the token _#EMPTY#_. WMS replaces the _#EMPTY#_ with a blank in the merged
configuration file and sends the file to the device.
9 Click OK to save the updated template and return to the Templates tab.
10 Click Cancel to revert back to the Templates tab without saving the changes to the template.
Supported Models
Defines the supported Extreme Networks infrastructure device for which this device
template applies.
Template Name
Displays the name assigned to the template upon its creation.
Description
Displays the description assigned to the template when originally created in WMS.