Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide164
● Adding a SNMP Trap Forward Notification Template on page 164
● Editing a SNMP Trap Forward Notification Template on page 164
● Deleting a SNMP Trap Forward Notification Template on page 165
Adding a SNMP Trap Forward Notification Template
Create a new SNMP Trap Forward Notification template as needed.
To create a template:
1 Select the SNMP Trap Forward tab and click the Add button.
2 Provide the following information to define SNMP Trap Forward Notification:
3 Click OK when completed with the add operation.
4 Selecting Cancel disregards the add operation.
Editing a SNMP Trap Forward Notification Template
An existing SNMP Trap Forward template may require its address or other values be modified to be
more relevant.
To revise the attributes if an existing SNMP notification template:
1 Select an existing template from amongst those available.
2 Click the Edit button.
SNMP Version
Select the SNMP version (either 1 or 2) sending the trap to the defined
destination. This is a required value.
SNMP Trap
Forward Name
Provide a user-friendly name for the SNMP resource receiving the trap information.
Destination IP
Address
Specify a destination IP address, for receiving the traps sent by WMS agent. This
is a required value.
Destination Port
Specify a destination port for receiving traps. This is a required value.
Trap Community
Enter a community name specific to the SNMP-capable client that receives the
traps. The name is required to match the name used within the remote network
management software. This is a required value.