Specifications

Extreme Networks Wireless Management Suite Reference Guide 161
● Adding a SNMP Profile on page 153
● Editing an SNMP Profile on page 155
● Deleting a SNMP Profile on page 156
Adding an Email Notification Template
To create a new Email notification template:
1 Click the Add button (within the Email Configuration tab).
2 Add the following data to complete the addition of the Email notification template:
If information is entered incorrectly, WMS will prompt you to properly enter each value before
creating the template.
3 Click OK once completed entering the information required to complete the template.
4 Click Cancel to stop the addition of the template and return to the Email Configuration tab.
Email Notification
Template
Provide a name for the Email notification template. This is a required value, and
could perhaps be complimentary with the subject.
User Name
Provide a user name for the account used to send this email.
Password
Provide a password required for the above user to submit the email.
SMTP Server IP
Address
Enter the IP address of the mail server that is used to send email. This is a
required value.
Recipients
Address
Provide the Email address for the account receiving the email. This is a required
value.
Sender’s Address
Enter the Email address for the WMS user account sending the Email. This is a
required value.
Subject
Provide a subject for the Email notification template to help differentiate from
others with similar template properties.