Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide152
Scheduling a Discovery
A WMS administrator can optionally schedule network discovery over a defined interval for each
available range. Once an IP Range has been defined and scheduled, it can be optionally enabled and
invoked at the scheduled time.
To schedule an IP range:
1 Select a range from amongst those displayed within the IP Range tab.
2 Click the Schedule button.
The selected IP Range displays within the Range Names field.
NOTE
More than one range can be selected at the same time for scheduling within the IP Range screen. However, when
scheduled at the same time, each range will use the same Start Date, Start Time and Daily, Weekly or Monthly
interval.
3 Define a Start Date in (mm/dd/yyyy) format.
4 Set a Start Time in (hh:mm) format.
5 Configure whether the select IP Range(s) are to be used for network discovery Daily, Weekly or
Monthly.
6 Click OK to schedule the file discovery using the intervals defined.
Those IP Ranges selected display a green Yes within the Scheduled column of the IP Range screen.
Schedule additional ranges as required, or select the Unschedule button to revert their scheduled
status.
7 Click Cancel to abort the import operation and revert back to the IP Range tab.
Enabling an IP Range
Scheduled IP Ranges cannot be started until they are enabled. This allows an WMS administrator to
optionally schedule multiple IP Ranges at different intervals, but only enable specific ones as needed by
the specific IP addresses they contain.
To enable an IP range:
1 Select an IP Range or multiple ranges from amongst those that have already been scheduled.
2 Click the Enable button.
Those IP Ranges selected display a green Yes within the Enabled column. Enable additional ranges as
required, or choose an enabled range and select the Disable button to revert their enabled status.