Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide148
1 Click Add from within the IP Range tab.
2 Provide the following Discovery Range Information as required:
3 Click Next > to continue.
4 Set the Device Polling and Polling configurations
.
Range Name
Defines the name for this range. This is a required value.
IP Wildcard
Sets the IP range to search within. You can use a wild card (such as “*”) to
specify variable IP addresses. This is a required value.
SNMP Access
Profile
Select a SNMP profile from the drop-down menu. The “default” profile is used by
default.
Enable Ping
Enables the ICMP ping feature. The ping reduces the amount of time needed in
the discovery process by checking if a device is up and running before attempting
to extract information from it using SNMP.