Specifications

Extreme Networks Wireless Management Suite Reference Guide 147
2 Click the Start button.
If you selected multiple devices or used the Select All option, the detection process will commence
for one device at a time as listed from top to bottom within the IP Range tab.
Refer to the Status column (within the IP Range tab) to assess the completion of the device detection
process. The Status column will update to “Completed” when the device detection process has
completed.
3 Refer to the Devices column to review the number of devices detected for the site using the criteria
you provided.
4 Refine your search criteria as needed to improve the search.
Stopping the Discovery Process
The network detection process can be terminated (once begun and in progress).
CAUTION
If the SNMP V3 timeout and retries intervals are increased (above their default values), it will take longer to stop the
discovery process. If the SNMP v3 discovery process fails, WMS will attempt the discovery using SNMP v2.
To stop a network detection process:
1 Select an IP range from amongst those displayed within the IP Range tab.
Optionally use the Select All option to select each IP range.
2 Click the Stop button.
Refer to the Status column (within the IP Range tab) to verify that this discovery attempt has been
Aborted.
Adding an IP Range
When needed, add a new IP range to define a new set of network device detection criteria.
To add an IP range: