Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide144
3 Modify the following WIPS Server Information (if necessary) to adjust the server’s configuration to be
viable as a WMS resource:
4 Adjust the following User Credentials as needed:
5 Click OK to save the modified WIPS server configuration.
6 Click Cancel to revert back to the WIPS Server Configuration screen without saving the updates to
the server configuration.
Deleting a WIPS Server
If the configuration of an existing WIPS server become obsolete and cannot be made relevant through
modification, consider removing the WIPS server from amongst those available from within the WIPS
Server Configuration screen.
Server Name
Change the user-friendly name of the WIPS Server. This is a required value.
IP Address
Update the IP Address of the WIPS Server. This is a required value.
Console Port
If necessary, change the port WMS uses to connect the WIPS console to the WIPS
server.
Description
Update the user-friendly description of the server to better describe its
configuration with WMS.
Admin Name
Modify the user credentials used to log into WIPS with Admin privileges. This is a
required value.
Modify Admin
Password
Select the Enable link to display parameters to provide the existing password and
define a confirm a new password for the Admin User ID provided. If this
information is not provided, the existing password permissions continue to apply.
Guest User
Change the credentials used to log into WIPS with Guest privileges.
Modify Guest
Password
Select the Enable link to display parameters to provide the existing password and
define a confirm a new password for the Guest User ID provided. If this
information is not provided, the existing password permissions continue to apply.