Specifications

Extreme Networks Wireless Management Suite Reference Guide 143
2 Provide the following WIPS Server Information to define the server’s configuration:
3 Define the following User Credentials:
4 Click OK to save the new WIPS server configuration.
5 Click Cancel to revert back to the WIPS Server Configuration screen without saving the WIPS server
configuration.
Editing the Properties of a WIPS Server
If the attributes of an existing WIPS server require modification to be viable for use with WMS, modify
the WIPS server as required.
To modify the attributes of an existing WIPS server within WMS:
1 Select an existing server from amongst those displayed within the WIPS Server Configuration screen.
2 Click the Edit button.
Server Name
Provide a user-friendly name for the WIPS Server. This is a required value.
IP Address
Enter the IP Address of the WIPS Server. This is a required value.
Console Port
Define the port the WIPS Server uses to connect to the WMS Server. This is a
required value.
Description
Provide a user-friendly description of the server to better describe its
configuration or use with WMS.
Admin User
Define the user credentials used to log into WIPS with Admin privileges. This is a
required value.
Admin Password
Provide the existing administrative password needed to access the WIPS Server you
are adding. If the password supplied to WMS does not match the existing password
of the WIPS Server, then you will not be able to use this server. This is a required
value.
Confirm Admin
Password
Confirm the administrative password supplied above in order to initiate it. This is a
required value.
Guest User
Set the credentials used to log into WIPS with Guest privileges
Guest Password
Provide the existing guest password needed to access the WIPS Server you are
adding. If the password supplied to WMS does not match the existing guest
password of the WIPS Server, then you will not be able to use this server.
Confirm Guest
Password
Confirm the guest password supplied above in order to initiate it.