Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide136
5 Click OK to save your modifications.
6 Selecting Cancel disregards your changes.
Deleting a Relay Server
An existing Relay Server can be removed from the list of those available to WMS.
To remove (delete) an existing Relay Server:
1 Highlight (select) an existing Relay Server.
2 Select Delete to remove the existing relay server.
3 Select Ye s to permanently remove the Relay Server. Select No to preserve this server’s availability
amongst those displayed within the Relay Server tab.
Device Management
Use the WMS Device Management facility to select devices and manage them directly through WMS. The
Device Management screen displays the name and IP address of the device, as well as the WMS
managed site each device was detected in. An indicator displays whether the device is managed or
planned by WMS.
To manage devices through WMS:
1 Select Device Management from the Administration menu.
2 Refer to the following (as displayed for detected devices) to discern what additional device
management may be warranted:
User name
Enter the user name needed to update the Relay Server used by WMS.
Password
Enter the password required to update the Relay Server used by WMS.
Device Name
Displays the user-friendly name of the discovered device.
IP Address
Displays the IP address of the detected device. Use this address to differentiate
the device from other devices of the same type that may have similar
configurations.
Type
Displays the type of the device (could be a controller or Access Point or any other
supported device type).