Specifications

Extreme Networks Wireless Management Suite Reference Guide 135
4 Click OK to save the relay server’s configuration.
5 Selecting Cancel disregards your changes.
Editing a Relay Server Configuration
To the edit configuration of an existing Relay Server:
1 Highlight (select) an existing Relay Server.
2 Select Edit to modify an existing relay server.
3 Modify the following Relay Server Information as required:
4 Modify the following FTP/TFTP Information as required to update the credentials used by WMS to
connect to the Relay Server:
Device accessible
IP
Provide an IP address of a Relay Server accessible from the infrastructure. This is
a required value.
WMS accessible
IP
Provide an IP address of the Relay Server accessed from the WMS Server. This is a
required value.
User name
Enter the user name needed to update the Relay Server used by WMS.
Password
Enter the password required to update the Relay Server used by WMS.
Relay Server
Name
Displays the Relay Server name for a site. The maximum number of characters
available to name the server is 32 characters. The name cannot be modified.
Description
If necessary, change the brief description of the Relay Server. The maximum
number of characters available to describe the server is 32 characters.
Protocol Used
Optionally change the FTP, TFTP or FTP and TFTP protocol from the drop-down
menu. FTP is the default setting.
Device accessible
IP
Provide an IP address of a Relay Server accessible from the infrastructure. This is
a required value.
WMS accessible
IP
Provide an IP address of the Relay Server accessed from the WMS Server. This is a
required value.