Specifications

WMS Administration
Extreme Networks Wireless Management Suite Reference Guide134
Once reviewed, assess if further configuration is required for a listed Relay Server. For more
information, see:
● Adding a Relay Server on page 134
● Editing a Relay Server Configuration on page 135
● Deleting a Relay Server on page 136
Adding a Relay Server
If the attributes of an existing server prove not useful to your requirements, consider creating a new
server.
1 Click the Add button to define the attributes of a new relay server.
2 Add the following Relay Server Information as required:
3 Provide the following FTP/TFTP Information as required:
Type
Defines the FTP or TFTP server used to firmware provisioning and configuration
management.
Description
Displays the user provided description of the Relay Server.
Device Accessible
IP
Displays the IP address of the Relay Server accessible from the infrastructure.
WMS Accessible
IP
Displays the IP address of the Relay Server accessible from the WMS Server.
Sites Supported
Displays the number of sites using the particular Relay Server.
Name
Defines the new Relay Server name. The maximum number of characters available
to name the server is 32 characters. This is a required value.
Description
Enter a brief description of the Relay Server. The maximum number of characters
available to describe the server is 32 characters.
Protocol Used
Set the FTP, TFTP or FTP and TFTP protocol from the drop-down menu. FTP is
the default setting.