Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide110
A details screen displays for the selected adopted access point.
7 Refer to the following to review the attributes of the selected access point. Use the scroll bar to the
right of the screen to navigate down to the information displayed below.
Access Point
Details
Displays the name, IP address, MAC address and model of the adopted access
point(s).
Radios
Select the checkbox option to the left of a radio to display a set of performance
details specific to that adopted access point radio. This step is where the
performance troubleshooting of specific access point can best be assessed.
RSSI
Displays the
Relative Signal Strength Indicator (RSSI) for data traffic transmitted
from the access point to its associated destination. Select a point in the graph
directly above one of the listed trend periods to display the radio name, its RSSI
and a time stamp of when the value was computed by WMS.
SNR (Signal/Noise
ratio)
Displays the level of “noise” (interference) detected within this access point’s
WMS managed network (by each hosted adopted access point radio). Select a
point in the graph directly above one of the listed trend periods to display the
radio name, its SNR and a time stamp of when the value was computed by WMS.
Bit Speed
Displays the Average Bit Speed (in bps format) detected within this access points
WMS managed network by each hosted adopted access point radio. Select a point
in the graph directly above one of the listed trend periods to display the radio
name, its bit speed and a time stamp of when the value was computed by WMS.
RF Utilization
Displays an approximate (cumulative) utilization of each access point radio. This
data calculated as throughput divided by average bit speed. Select a point in the
graph directly above one of the listed trend periods to display the radio name, its
utilization and a time stamp of when the value was computed by WMS.