Specifications

Extreme Networks Wireless Management Suite Reference Guide 107
9 Optionally select an MU or group of MUs from within the Mobile Units field and select the Next
button at the bottom of the screen to display deployment and network address information specific
to the selected MU.
Refer to the AP Connectivity Report for the MU to assess its association performance in respect to
other WMS managed access point it could potentially be associated with.
10 Select the Back button as needed to select and display the attributes of additional access points and
MUs as a means of comparing performance or making determinations for better device placements
and load balances.
SNR
Displays the level of “noise” (interference) detected within this radio’s coverage
area. Select a point in the graph directly above one of the listed trend periods to
display the radio name, its SNR and a time stamp of when the value was
computed by WMS.
Bit Speed
Displays the Average Bit Speed (in bps format) detected within this radio’s WMS
managed network by each hosted access point radio. Select a point in the graph
directly above one of the listed trend periods to display the radio name, its bit
speed and a time stamp of when the value was computed by WMS.
Rf Utilization
Displays an approximate (cumulative) utilization for the selected radio. This data
calculated as throughput divided by average bit speed. Select a point in the graph
directly above one of the listed trend periods to display the radio name, its
utilization and a time stamp of when the value was computed by WMS.
Number of MUs
Adopted
Displays the radio’s number of associated MUs over the timeline listed at the
bottom of the screen. Select a point in the graph directly above one of the listed
trend periods to display the radio name, its adopted MU count and a time stamp
of when the value was computed by WMS.