Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide106
7 Select a radio checkbox from those available (for the selected access point) and click Next to display
a set of performance information specific to the selected radio.
8 Refer to the following to review the attributes of the selected access point radio:
RF Utilization
Displays an approximate (cumulative) utilization of each access point radio. This
data calculated as throughput divided by average bit speed. Select a point in the
graph directly above one of the listed trend periods to display the radio name, its
utilization and a time stamp of when the value was computed by WMS.
Number of MUs
Adopted
Displays each access point radio’s number of associated MUs over the timeline
listed at the bottom of the screen. Select a point in the graph directly above one
of the listed trend periods to display the radio name, its adopted MU count and a
time stamp of when the value was computed by WMS.
Radio Details
Displays the radio’s database ID, its instance ID, hardware encoded MAC address
and radio type (defining its band of operation).
Mobile Units
List the MUs currently associated with this specific access point. Optionally select
an MU or group or MUs to further refine your troubleshooting inquiry by displaying
device identification and performance information specific to individual associated
MUs.
TX Retries
Displays the number of transmission retries for the selected radio. Select a point in
the graph directly above one of the listed trend periods to display the radio’s
identifier, the number of radio retries and a time stamp of when the value was
computed by WMS.
RSSI
Displays the
Relative Signal Strength Indicator (RSSI) for data traffic transmitted
from the selected radio to its destination. Select a point in the graph directly
above one of the listed trend periods to display the radio name, its RSSI and a
time stamp of when the value was computed by WMS.