Specifications

My Network Configuration
Extreme Networks Wireless Management Suite Reference Guide104
9 Select the Back button as needed to select and display the attributes of additional WLANs as a means
of comparing performance.
Troubleshooting Access Points(AP35XX)
Access Point model 3510 and 3550 (referred to here collectively as AP35XX) performance data can be
inquired at the device level, for specific radios or for the MUs they are currently supporting.
To troubleshoot WMS managed AP35XX model access points:
1 Select the My Network main menu item.
2 Select Diagnostics.
3 Select the Troubleshoot Access Points(AP35XX) checkbox.
4 Select an access point or group of access points to further refine your troubleshooting inquiry.
Each access point displays its network IP address, factory assigned MAC address, model number
and the WMS assigned site where it resides. Use this information to help determine if a specific
device should be selected for further inquiry based on poor performance observed within a specific
WMS managed site.
If unable to find a target access point, it is either not on the network or was never discovered by
WMS. No single access point is selected by default when the Access Point(AP35XX) tab is populated
SNR (Signal/Noise
ratio)
Displays the noise level (in dB format) for the WLAN. Do periods with increased
noise levels coincide with periods of increased data traffic within the WLAN?
Throughput
Displays the throughput (in bps format) for each selected WLAN. Use this
information to assess whether traffic within this WLAN should be decreased to
improve performance.