User guide

Modifying Altitude AP settings
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
65
To modify an Altitude AP's registration status:
1 From the main menu, click Altitude AP Configuration. The Altitude AP screen is displayed.
2 In the left pane, click Access Approval. The Access Approval screen is displayed, along with the
registered Altitude APs and their status.
3 To select the Altitude APs for status change, do one of the following:
● For a specific Altitude AP, select the corresponding checkbox.
● For Altitude APs by category, click one of the Select Altitude APs options.
To deselect your Altitude AP selections, click Clear All.
4 Click the appropriate Perform action on selected Altitude APs option:
● Approved – Change an Altitude AP's status from Pending to Approved, if the AP Registration
screen was set to register only approved Altitude APs.
● Pending – AP is removed from the Active list, and is forced into discovery.
● Release – Release foreign Altitude APs after recovery from a failover. Releasing an AP
corresponds to the Availability functionality. For more information, see Chapter 6, “Availability,
mobility, and controller functionality.”
● Delete – Delete this Altitude AP from the WM-AD.