User guide

Performing the first-time setup of the Summit WM series switch
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
47
8 To save your changes, click Save.
To view the forwarding table on the Summit WM series switch:
1 From the main menu, click Reports & Displays. The Summit Reports & Displays screen is
displayed.
2 To view the static routes that have been defined for the Summit WM series switch, click Forwarding
Ta ble . The Forwarding Table is displayed.
This report displays all defined routes, whether static or OSPF, and their current status.
3 To update the display, click Refresh.
Setting up OSPF Routing
To enable OSPF (OSPF RFC2328) routing, you must:
● Define one data port as a router port in the IP Addresses screen
● Enable OSPF globally on the Summit WM series switch
● Define the global OSPF parameters
● Enable (or disable) OSPF on the port that you defined as a router port