User guide

Configuring the Summit WM series switch
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
44
To configure the data port interfaces on the Summit WM series switch:
1 From the main menu, click Summit Switch Configuration. The Summit WM series switch
Configuration screen is displayed.
2 In the left pane, click IP Addresses. The Management Port Settings and Interfaces screen is
displayed.
The lower portion of the Summit WM series switch Configuration screen displays the four Ethernet
ports. For each port, the MAC address is displayed automatically.
3 To select a port, click it.
Port configuration allows for the explicit state of the administration state for each interface. By
default, data interface states will be disabled. You can then enable each of the data interfaces
individually. A disabled interface does not allow data to flow (receive/transmit).