User guide

Configuring the Summit WM series switch

Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide

6 Click Login. The Summit Wireless Assistant main menu screen is displayed.

NOTE

In the footer of the Summit Wireless Assistant, the following is displayed:

■ [host name | product name | up time]

If there is no key (unlicensed), the product name will not be displayed.

■ User is the user id you used to login in. For example, admin.

■ Port Status is the connectivity state of the port. M is for the Management interface, which is

on eth0 and the numbered lights reflect the esa ports on the system. Green indicates the

interface is up and running. Red indicates the interface is down.

7 From the main menu, click Summit Switch Configuration. The Summit WM series switch

Configuration screen is displayed.