User guide

Working with Summit spy scan results
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
185
6 To clear all detected rogue devices from the list, click Clear Detected Rogues.
NOTE
To avoid the Summit spy's database becoming too large, it is recommended that you either delete Rogue APs or add
them to the Friendly APs list, rather than leaving them in the Rogue list.
To add an AP from the Summit spy scan results to the list of friendly APs:
1 From the main menu, click Summit Spy. The Summit Spy screen is displayed.
2 Click the Rogue Detection tab.
3 To add an Altitude AP to the Friendly APs list, click Add to Friendly List. The AP is removed from
this list and is displayed in the Friendly AP Definitions section of the Friendly AP’s tab.
To delete an AP from the Summit spy scan results:
1 From the main menu, click Summit Spy. The Summit Spy screen is displayed.
2 Click the Rogue Detection tab.
3 To delete a specific AP from the Summit spy scan results, click the corresponding Delete button. The
AP is removed from the list.
4 To clear all rogue access points from the Summit spy scan results, click Clear Detected Rogues. All
APs are removed from the list.