User guide

Working with the Summit WM Series Spy
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
180
Enabling the Analysis and data collector engines
Before using the Summit spy, you must enable and define the Analysis and data collector engines.
To enable the Analysis engine:
1 From the main menu, click Summit Switch Configuration. The Summit Switch Configuration
screen is displayed.
2 In the left pane, click Summit Spy. The Summit Spy Configuration screen is displayed.
3 To enable the Summit Spy Analysis Engine, select the Enable Summit Spy Analysis Engine
checkbox.
4 To enable the Summit Spy Data Collection Engine on this Summit WM series switch, select the
Enable Local Summit Spy Data Collection Engine checkbox.
5 To identify the remote RF Data Collector Engine that the Analysis Engine will poll for data, type the
IP address of the Summit WM series switch on which the remote Data Collector resides in the IP
Address box.
6 For the data collection engine:
● In the Poll interval box, type (in seconds) the interval that the Analysis Engine will poll the RF
Data Collector to maintain connection status. The default is 30 seconds.
● In the Poll retry count box, type the number of times the Analysis Engine will attempt to poll the
RF Data Collector to maintain connection status, before it stops sending requests. The default is 2
attempts.