User guide

Availability overview
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 User Guide
155
An alternate method to setting up APs includes:
1 Add each Altitude AP manually to each Summit WM series switch.
2 From the AP Properties screen, click Add Altitude AP.
3 Define the Altitude AP and click Add Altitude AP.
Manually defined APs will inherit the default AP configuration settings.
WARNING!
If two Summit WM series switches are paired and one has the Allow All option set for Altitude AP registration,
all Altitude APs will register with that Summit WM series switch.
To set the primary or secondary Summit WM series switches for availability:
1 From the main menu, click Altitude AP Configuration. The Altitude APs screen is displayed.
2 In the left pane, click AP Registration. The Altitude AP Registration screen is displayed.
3 To enable availability, select the Paired option.
4 Do one of the following:
● For a primary controller, in the Summit Switch IP Address box, type the IP address of the
physical port of the secondary Summit WM series switch. This IP address must be on a routable
subnet between the two Summit WM series switches.
● For a secondary controller, in the Summit Switch IP Address box, type the IP address of the
Management port or physical port of the primary Summit WM series switch.