Specifications

WM-AD configuration
HWC_GSG_VNSConfiguration.fm
Creating and configuring a Routed WM-AD
120385-00 Rev 01, March 2007
98 Summit WM, Getting Started Guide
4. From the WM-AD Mode drop-down list, click Routed.
5. From the DHCP drop-down list, click one of the two options:
• Local DHCP Server: If you select Local DHCP Server, the built-in DHCP
server in Summit WM Switch provides the IP addresses to the devices to
the wireless network. For more information, see Section 2.1.5.2, “DHCP
for WM-AD”, on page 18.
• Gateway – The Summit WM Switch advertises this address to the
wireless devices when they sign on and get a dynamic IP address.
The gateway corresponds to the IP address that is communicated to
mobile users
• Mask – Subnet mask for this IP address to separate the network
portion from the host portion of the address (typically 255.255.255.0).
• Address Range – Range from which the IP addresses are provided
to the wireless devices that would use this WM-AD. This text box
(from and to) may populate automatically, if you have already
provided the range while configuring the APs.
• B’cast Address – Populates automatically based on the Gateway IP
address and the subnet mask of the WM-AD.
•Domain Name – External enterprise domain name. You must type
the external enterprise domain name in this text box.