Specifications

HWC_GSG_APConfiguration.fm
Altitude AP’s configuration
Configuring static IP address for Altitude APs
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide 87
•Step 2 – Configure the acquired IP address (or any other assigned IP
address) as the Static IP address for the Altitude AP.
To configure a static IP address for the Altitude AP:
1. From the main menu, click Altitude AP Configuration. The Altitude AP
Configuration screen is displayed.
2. Click the Static Configuration tab. The Configuration Settings screen is
displayed.
3. In the IP Address Assignment section, select Use DHCP.
4. In the Add text box, type the IP address of the Summit WM Switch that will
manage this Altitude AP.
5. Click Add. The IP address is added to the list.
6. Repeat Steps 4 to 5 to add additional Summit WM Switches.
The Altitude AP attempts to connect to the IP addresses (of the Summit WM
Switches) in the order in which they are listed in the Summit Switch Search
List. This feature allows the Altitude AP to bypass the discovery process. If
the Summit Switch Search List is not populated, the Altitude AP will use
SLP to discover a Summit WM Switch.
7. To save your changes, click Save. The Altitude AP reboots.