Specifications

HWC_GSG_Chapter 2_Default_Settings.fm
Summit WM-Series WLAN Switch configuration
Accessing the Summit WM-Series WLAN Switch for the first time
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide 39
Note: Only the following models support VLAN:
• Summit Switch WM2000
• Summit Switch WM200
10. In the Management Port Settings section, click Modify. The System Port
Configuration screen is displayed.
11. Type the following information:
•Hostname – Specifies the name of the Summit Switch by which it will be
known. You must assign a unique name for the Summit Switch.
•Domain – Specifies the IP domain name of the enterprise network.
• Management IP address – Specifies the new IP address for the Summit
WM Switch’s port. Change the value in this text box to the IP address
assigned to the Summit WM Switch’s management port by your network
administrator.
• Subnet Mask – Specifies the subnet mask for the Summit WM Switch’s
management port. Change the value in this text box to the value provided
by your network administrator.