Specifications

Summit WM-Series WLAN Switch Software Solution
HWC_GSG_Chapter 1_Overview.fm
Collecting information for installation
120385-00 Rev 01, March 2007
32 Summit WM, Getting Started Guide
Authentication
and Accounting
information for
captive portal
configuration
•Port – Used to access the RADIUS server. The default is 1812.
• # of Retries – The number of times the Summit WM Switch will
attempt to access the RADIUS server.
•Timeout – The maximum time for which Summit WM Switch will
wait for a response from the RADIUS server before making a re-
attempt.
• NAS Identifier – A RADIUS attribute that identifies the server
responsible for passing information to the designated servers and
then acting on the response returned. This is optional.
Internal captive
portal settings
information
• Login Label – The text that will appear as a label for the user
name.
• Password Label – The text that will appear as a label for the user
password text box.
• Header URL – The URL of the file to be displayed in the header
of the Captive Portal screen.
• Footer URL – The URL of the file to be displayed in the footer of
the Captive Portal screen.
• Message – The message that you type in this text box will be
displayed above the Login text box to greet the user. You can type
a message, explaining why the Captive Portal screen is used and
the instructions for the user.
• Replace Gateway IP with FQDN – If you are using FQDN (Fully
Qualified Domain Name) as the gateway address, document the
FQDN.
• Default Redirection URL – The URL to which the wireless
devices will be directed before authentication.
Shared Secret
Password for
external captive
portal
configuration
Password – This password encrypts the information exchanged
between the Summit WM Switch and the external Captive Portal
server.
MAC-based
authentication
information
•Port – The port used to access the RADIUS server. The default is
1812.
• # of Retries – Number of times the Summit WM Switch will
attempt to access the RADIUS server.
•Timeout – The maximum time for which Summit WM Switch will
wait for a response from the RADIUS server before making a re-
attempt.
• NAS IP Address – IP address of the network access server
(NAS).
Exception filter
rules information
IP/subnet – The destination IP address. You can also specify the IP
range, a port designation or a port range on the IP address here.
Static WEP
privacy
information
• WEP Key Length – Size of a WEP key.
•Strings – This is the secret WEP key string.
Configuration data Description Your entry
Table 4 Information gathering table