Specifications

Summit WM-Series WLAN Switch Software Solution
HWC_GSG_Chapter 1_Overview.fm
Summit WM Switch’s physical description
120385-00 Rev 01, March 2007
20 Summit WM, Getting Started Guide
2.1.5.4 DHCP for traffic bridged locally at Altitude AP
Figure 5 DHCP for traffic bridged locally at Altitude AP
The DHCP relay configuration is done via Summit WM Switch. For more
information, see Section 8.4, “Creating and configuring a Bridge Traffic Locally At
WAP WM-AD”, on page 101.
2.2 Summit WM Switch’s physical description
This section provides a physical description of the Summit WM Switch.
2.2.1 Summit Switch WM2000 front panel
The Summit Switch WM2000is composed of the following three cards:
• Media Flash 1000 (MF 1000)
• Network Processor 4000 (NP 4000)
• Supervisor 1100 (SC 1100)
* A wireless device sends a
request for IP address to
Altitude AP
* The Altitude AP forwards
the request to the DHCP
server
* The DHCP server responds
by sending the IP address to
the Altitude AP
* The Altitude AP sends the
IP address to the wireless
device
Wireless
Device
Wireless
Device
Altitude AP
Altitude AP
DHCP Server
DNS Server
Summit WM Switch