Specifications

HWC_GSG_VNSConfiguration.fm
WM-AD configuration
Configuring privacy for WM-AD
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide 119
• Wi-fi Protected Access (WPA) version 2 with encryption by advanced
encryption standard with counter-mode/CBC-MAC protocol (AES-CCMP)
8.7.2.1 Configuring Static WEP
To configure Static WEP:
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the left pane, click the AAA WM-AD for which you want to configure the
Static WEP privacy. The topology tab is displayed.
3. Click the Privacy tab.
4. Repeat Step 4 to Step 6 of Section 8.7.1.1, “Configuring Static WEP”, on page
116.
8.7.2.2 Configuring Dynamic WEP
The dynamic key WEP mechanism changes the key for each user and each
session.
To set up Dynamic WEP privacy:
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the left pane, click the AAA WM-AD for which you want to configure the
Dynamic WEP privacy. The Topology tab is displayed.
3. Click the Privacy tab.
4. Select Dynamic Keys.
5. To save your changes, click Save.
8.7.2.3 Configuring Wi-fi Protected Access (WPA v1 and WPA
v2) privacy
WPA v1 and WPA v2 adds authentication to WEP encryption and key
management. The authentication portion of WPA for AAA is in enterprise mode.
Key features of WPA privacy include:
• Specifies 802.1x with extensible authentication protocol (EAP)
• Uses RADIUS protocols for authentication and key distribution; therefore,
requires a RADIUS or other authentication server.