Specifications

HWC_GSG_VNSConfiguration.fm
WM-AD configuration
Configuring privacy for WM-AD
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide 115
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the left pane, click the WM-AD for which you want to configure the Default
filtering rules. The Topology tab is displayed.
3. Click the Filtering tab.
4. From the Filter ID drop-down list, click Default. The default rule in the Default
filter is displayed.
The default rule in the Default filter displays a Deny All configuration. You can
modify the configuration to Allow All, if it is appropriate for the network needs
of the WM-AD.
If applicable, you can create more rules for the Default filter.
5. Configure filtering rules for the Exception filter. For more information, see
Step 5 to Step 8 of Section 8.6.1.1, “Configuring filtering rules for Exception
filter”, on page 112.
6. To save your changes, click Save.
8.6.2 Configuring filtering rules for filters in AAA
network assignment
The AAA network assignment type offers the following two default filters:
Default
Exception
In AAA network assignment type, a Non-authenticated filter becomes
unnecessary because the users are already authenticated.
For more information, see Section 8.6.1.1, “Configuring filtering rules for
Exception filter”, on page 112, and Section 8.6.1.3, “Configuring filtering rules for
Default filter”, on page 114.
Now you must configure privacy for the WM-AD. The following section explains
how to configure privacy.
8.7 Configuring privacy for WM-AD
Privacy is a mechanism that protects data over wireless and wired networks using
encryption techniques.
The Summit WM Switch provides several privacy mechanism to protect data over
the WLAN. The privacy mechanism can be classified on the basis of network
assignment types — SSID and AAA.