User guide

Configuring EAPS on a Switch
ExtremeWare 7.2e Installation and User Guide 189
Fail Timer interval: The configured value of the timer in seconds, specifying the time that
the master node waits before the failtimer expires.
Failtimer expiry action: Displays the action taken when the failtimer expires:
• Send-alert—Sends a critical message to the syslog when the
failtimer expires.
• Open-secondary-port—Opens the secondary port when the failtimer
expires.
Displays only for master nodes.
Preforwarding Timer interval:
1
The configured value of the timer. This value is set internally by the
EAPS software.
Last update:
1
Displayed only for transit nodes; indicates the last time the transit node
received a hello packet from the master node (identified by its MAC
address).
EAPS Domain has … Controller Vlans: Lists the assigned name and ID of the control VLAN.
EAPS Domain has … Protected Vlans:
2
Lists the assigned names and VLAN IDs of all the protected VLANs
configured on this EAPS domain.
Number of Protected Vlans: The count of protected VLANs configured on this EAPS domain.
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the show eaps command.
Table 32: show eaps Display Fields (Continued)
Field Description